Rear Header Upper
Correction code:
10400100202
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASY RR HEADER (For vehicles built before April 3rd, 2018) ASY RR HEADER (For vehicles built on or after April 3rd, 2018) |
|
| 31 |
SPR, 5x4.5
|
Tesla part number 1026938-00-A. |
| 12 |
SPR, 5x7
|
Tesla part number 1026943-00-A. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the original component.
or 
Factory Spot Welds
-
Prepare for installation.
or SPRs, 5x4.5
NoteThe following Tesla SPR die is required to install this SPR: SM 085 0125.
or SPRs, 5x7
NoteThe following Tesla SPR die is required to install this SPR: SM 085 0125.
-
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
NoteApply structural foam (circled in red).
- Install the new component or components.
- Perform any necessary post-repair operations.