A-Pillar Reinforcement Assembly
Correction code:
10100128002
10100128102
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASY-REINF A PILLAR (A-Pillar Reinforcement) |
|
| 3 |
Bolt, hex-head
,HF,M6X18 |
Tesla part number 1006529-00-A. |
| 1 |
 Stud, DOUBLE ENDED STUD,HF,M8x25+M8x15 |
Tesla part number 1060709-00-B. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the necessary portion
of the Body Side Outer to expose
the underlying component being replaced.
-
Remove the original component.
or Bolts, hex-head
Stud
-
Prepare for installation.
Stud
-
Install the new component or components.
Torque the fasteners as follows:
- M6X18 bolts, part number 1006529-00-A: 10 Nm.
- M8x25+M8x15 double-ended studs, part number 1060709-00-B: 10 Nm.
-
Install the portion of the
Body Side Outer that was
removed to expose the component being replaced.
- Perform any necessary post-repair operations.