Recent Changes In This Manual

The list below shows procedures or pages that have been added or updated recently.

Procedure/Page Description Date
Repair procedures Mechanical prerequisite and post-requisite procedures formerly available only in the Service Manual have been incorporated as steps in the Collision Repair Manual. 21-September-2026
Approved Chemicals APAC sourcing information updated. 27-August-2026
Electrical Harness Repair Guidelines This content has been replaced with updated content from the Service Manual. 26-August-2026
Vehicle and Wheel Paint Codes Garnet Red has been added to the Vehicle Paint Codes list. 09-June-2026
Approved Chemicals Added Structural Plastic Adhesive, and updated availability of Semi-Rigid Plastic Repair. 08-April-26
Approved Squeeze-Type Resistance Spot (STRS) Welders Update the list of approved GYS welders. 12-March-26
Approved Chemicals The list of Anti-Chip Coatings has been updated. 11-February-26
Front Door and Front Door Latch Replacement Door latch configuration update information changed. 15-May-25
Front Shock Tower Extension Procedure steps, images, and fasteners updated. 16-April-25
Falcon Door Striker Bracket Procedure steps, images, and fasteners updated. 01-April-25
Rear Node Inner Reinforcements (Rear) Procedure steps, images, and fasteners updated. 28-March-25
Falcon Door Striker Bracket Procedure steps, images, and fasteners updated. 14-March-25
Rear Panel Assembly Procedure steps, images, and fasteners updated. 06-March-25