Third Row Seat Reinforcement Nut
Correction code:
16010200502
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | BARREL NUT, M10 (Third Row Seat Nut Plate) |
Tesla part number 2006869-S0-A. |
| 2 |
Pop
Rivets
|
Tesla part number 1003668-00-C. |
| 1 | BUTYL FOIL PATCH 50x50x1mm | Tesla part number 1045194-00-A. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the original component.
Cut a hole in the floor panel to allow access to the original component.
- A = 180 mm
- B = 40 mm
- C = 26 mm
- D = 12 mm
Factory Structural Rivet
-
Prepare for installation.
or Pop
Rivets
- Install the new component or components.
-
Cover the access hole with a
butyl patch.
- Perform any necessary post-repair operations.