03/07/2024 16:04:09
Inner Wheelhouse Reinforcement Mount (Vehicles Built After October 17, 2016)
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | WHEELHOUSE FRONT (Wheelhouse Front) |
|
| 3 |
High Strength Structural Rivet, 6.5 mm
|
|
| 2 |
Structural Bulb Rivet, 6.5 mm
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the Inner Wheelhouse
Reinforcement Mount from the Wheelhouse Front service part.
-
Remove the original component.
or 
Factory Spot Welds
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
- Perform any necessary post-repair operations.
