2026-05-12

Panel - Aero Shield - Rear (Remove and Replace)

Correction code 12030502 0.24 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

  • 2024-01-04: Updated consumables information.

Torque Specifications

Tabella 1. Torque Specifications: Panel - Aero Shield - Rear (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the rear aero shield panel to the vehicle
5.5 Nm (4.1 lbs-ft)
  • 10 mm socket
 Reuse
Informational PurposesAn informational icon, calling your attention
Nota
Apply threadlocker to the threads of each bolt prior to installation.

Remove

  1. Raise and support the vehicle. See #GUID-A0CF7C9C-B57C-42B3-B8ED-A95758D026E9.
  2. Remove the push clips (x2) located at the LH and RH of the wheel house liner.
  3. Remove the bolts (x9) that attach the rear aero shield panel to the vehicle, and then remove the panel from the vehicle.

Install

  1. Apply a thin bead of threadlocker to the threads of the bolts that attach the rear aero shield panel to the vehicle.
  2. Install the rear aero shield panel to the underside of the vehicle, and then install the bolts that attach the panel to the vehicle.
    5.5 Nm (4.1 lbs-ft)
  3. Install the push clips (x2) located at the LH and RH of the wheel house liner.
  4. Lower the vehicle. See #GUID-A0CF7C9C-B57C-42B3-B8ED-A95758D026E9.