2026-08-09

Fascia - Rear - Upper (Remove and Replace)

Correction code 10012802 0.84 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il relativo FRT associato, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

  • 2023-11-02: Added notes to distinguish between the steps for HW3/HW4 vehicles.

Torque Specifications

Table 1. Torque Specifications: Fascia - Rear - Upper (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x6) that attach the lower rear fascia to the upper rear fascia
3 Nm (2.2 lbs-ft)
  • 10 mm socket
 Reuse

Remove

  1. Remove the rear fascia. See Fascia - Rear (Remove and Install).
  2. For HW3 vehicles, release the connector locks (x2), and then disconnect the rear fascia harness connectors (x6).
    Note
    Skip this step for HW4 vehicles.
    Note
    Do not push down on the red locking tab. Pull the red tab to release the connector lock.
  3. For HW3 vehicles, remove the clips that attach the rear fascia harness to the upper rear fascia, and then remove the harness from the assembly.
    Note
    Skip this step for HW4 vehicles.
  4. Remove the bolts (x6) that attach the lower rear fascia to the upper rear fascia.
    3 Nm (2.2 lbs-ft)
    Tip
    Use of the following tool(s) is recommended:
    • 10 mm socket
  5. Remove the metal clips from the center of lower rear fascia.
  6. Release the tabs (x17) that attach the upper rear fascia to the lower rear fascia, and then separate the upper rear fascia from the lower rear fascia.
  7. Remove the rear parking distance sensors from the upper rear fascia for HW3 vehicles. See #GUID-57298231-B4D9-4589-AD7C-E82BBC397FD7.
    Note
    Skip this step for HW4 vehicles.

Install

Installation procedure is the reverse of removal.