2026-08-09

Reservoir - Windshield Washer (Remove and Replace)

Correction code 17501102 0.42 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il relativo FRT associato, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Remove

  1. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  2. Remove the LH and RH wiper arms. See #GUID-40F2AE79-B55A-4796-B733-9622D9A5F73B.
  3. Remove the cowl screen panel. See Panel - Cowl Screen (Remove and Replace).
  4. Remove the wiper motor. See Wiper Module (Remove and Replace).
  5. Remove the windshield washer system assembly. .
  6. Remove the washer hose, washer pump and washer grommet from the reservoir.
    Note
    Inspect the washer pump grommet for damage and replace as necessary.
  7. Use a plastic trim tool to gently pry the washer level sensor from the washer assembly, and then remove the rubber grommet and sensor from the assembly..
    Note
    Inspect the level sensor grommet for damage and replace as necessary.
  8. Remove the windshield washer reservoir.

Install

Installation procedure is the reverse of removal.