Buckle - 2nd Row - LH (5 Seat) (Remove and Replace)
Correction code
20057002
0.18
NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il relativo FRT associato, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo.
NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati.
NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.
- 2024-11-26: Add a note to clarify that harness should not be around bolt when install the buckle to seat assembly.
Torque Specifications
| Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
|---|---|---|---|---|
| Bolt that attaches the LH buckle to the body of the vehicle | ![]() 40 Nm (29.5 lbs-ft) |
|
Replace | Bolt is captured in the buckle assembly |
Remove
- Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
-
Use a clip prytool to release the clip that attaches the LH 2nd row buckle to the seat frame.
-
Disconnect the LH 2nd row buckle electrical connector.
-
Release the captured bolt that
attaches the LH 2nd row buckle to the seat frame.
NoteUse of the following tool(s) is recommended:
- Torx T50 socket
Install
-
Install the LH 2nd row buckle to the seat frame by tightening the captured bolt.
40 Nm (29.5 lbs-ft)NoteMake sure to not pinch the wire between the bolt and the buckle bracket. Harness should not be around bolt.NoteUse of the following tool(s) is recommended:- Torx T50 socket
-
Connect the LH 2nd row buckle electrical connector.
-
Secure the clip that attaches the LH 2nd row buckle to the seat frame.
- Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
