2026-08-09

Air Extractor - LH (Remove and Replace)

Correction code 18105302 0.30 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il relativo FRT associato, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Remove

  1. Open all the doors and liftgate.
    Nota
    Latch the rear doors to prevent accidental closing when vehicle is powered down.
  2. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  3. Remove the LH lower C-pillar trim. See .
  4. Remove the rear trunk load floor. See .
  5. Remove the front trunk load floor. See .
  6. Remove the LH load floor bracket. See .
  7. Remove the LH trunk side trim. See Trim - Side - Trunk - LH (Remove and Replace).
  8. Release the clips that attach the LH air extractor to the vehicle.
  9. Push the LH air extractor into the body panel, and then rotate outward to remove it from the vehicle.

Install

  1. Insert the LH air extractor into the body panel, rotate the extractor into position, and then pull the extractor outwards to the fasten the clips.
  2. Install the LH trunk side trim. See Trim - Side - Trunk - LH (Remove and Replace).
  3. Install the LH load floor bracket. See .
  4. Install the front trunk load floor. See .
  5. Install the rear trunk load floor. See .
  6. Install the LH lower C-pillar trim. See .
  7. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  8. Close all the doors and liftgate.