Seal - Body - Side - Front - Primary - LH (Remove and Replace)
Correction code
11700302
0.06
NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il relativo FRT associato, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo.
NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati.
NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.
- 2026-08-12: Added notes to verify that the primary seal is installed behind the header seal.
Remove
- Open the LH rear door.
-
Pull on the LH primary front
side body seal to release it from the body.
NoteStart in the corner closest to the B-pillar applique and pull straight down to release the upper portion of the trim first.
Install
-
Position the LH primary
front body seal to the mid A-pillar trim, and then press the seal into
position working along the upper bright trim molding.
NoteEnsure the seam on the seal is even with the bottom of the LH lower B-Pillar.NoteEnsure the wider side of the seal is seated towards the interior of the vehicle.NoteMake sure that the primary seal is installed behind the header seal.
-
Tuck the seal into the
bright trim molding.
NoteMake sure that the trim is fitted properly into the trim panels and the headliner
-
Press the LH primary front
body seal into the B-pillar, and work downwards toward the bottom of the
A-pillar.
NoteIf excess material forms along the seal, release the seal and disperse in opposite directions.NoteMake sure that the primary seal is installed behind the header seal.
- Calibrate the windows. See .
- Confirm that the window operates correctly and without any abnormal noise.