2026-05-12

Hinge - Hood - LH (Remove and Replace)

Correction code 11330302 0.36 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Remove

  1. Remove the hood from the vehicle. See Hood (Remove and Install).
  2. Release the clip that attaches the LH gas strut to the hood hinge, and then remove the strut from the assembly.
  3. Apply masking tape to the LH hinge location to aid in alignment during install.
  4. Remove the bolts that attaches the LH hood hinge to the body.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13mm swivel ball socket
  5. Remove the LH hood hinge from the vehicle.

Install

  1. Position the LH hood hinge into the vehicle.
  2. Install the bolts that attaches the LH hood hinge to the body.
    25 Nm (18.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use the masking tape to aid in alignment. Adjust the hood hinge as needed.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13mm swivel ball socket
  3. Remove the masking tape from the LH hinge location.
  4. Install the clip that attaches the LH gas strut to the hood hinge.
  5. Install the hood. See Hood (Remove and Install).