2026-08-09

Subwoofer (Remove and Replace)

Correction code 21212002 0.42 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il relativo FRT associato, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Remove

  1. Open all the doors and fully lower all the windows.
  2. Move the driver seat fully forward.
  3. Remove the 2nd row lower cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  4. Remove the RH lower C-pillar trim. See .
  5. Remove the rear trunk load floor. See .
  6. Remove the front trunk load floor. See .
  7. Remove the trunk sill trim. See .
  8. Remove the RH trunk side trim.
  9. Remove the RH upper C-pillar trim. See .
  10. Remove the nuts and bolt that attach the amplifier to the body, and then carefully set the amplifier aside.
    5.4 Nm (4.0 lbs-ft)
    Suggerimento
    Use of the following tool(s) is recommended:
    • 10 mm socket
    • 2 in extension
  11. Disconnect the subwoofer electrical connector.
  12. Remove the nut and bolts that attach the subwoofer to the vehicle, and then remove the subwoofer from the vehicle.
    5.4 Nm (4.0 lbs-ft)
    Suggerimento
    Use of the following tool(s) is recommended:
    • 10 mm socket
    • 2 in extension

Install

Installation procedure is the reverse of removal.