2026-08-09

Garnish - Fender - Rear - LH (Remove and Replace)

Correction code 12201402 0.06 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il relativo FRT associato, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Warning
I video inclusi in questa procedura hanno il solo scopo di fornire una panoramica supplementare. Seguire tutti i passaggi elencati nella procedura per evitare danni ai componenti e/o lesioni personali.
  • 2023-06-15: Added the whole procedure video as an overview for supplemental purposes only.

Remove

  1. Release the clips (x12) that attach the LH rear fender garnish to the vehicle, and then remove the garnish from the vehicle.
    Tip
    Starting from the center of the LH rear fender garnish, carefully pull the garnish away from the vehicle and work outward.
    CAUTION
    Be careful not to bend the tabs that attach the rear of the garnish to the rear fascia.

Install

Installation procedure is the reverse of removal, except for the following:

  • Position the rear fender garnish alignment tabs in the rocker panel and rear diffuser before installing the clips.
  • Once the rear fender garnish alignment tabs are installed, install the clips at each end of the fender garnish and work toward the center.
    CAUTION
    Be careful not to bend the tabs that attach the rear of the garnish to the rear fascia.