2026-10-15
帘式气囊 - 左侧（左驾驶） ((拆卸和更换))
校正代码
2001020022
FRT
1.26
注意：除非本程序中另有明确规定，否则上文所列校正代码及相关 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。
注意：请参阅深入了解 FRT 及其创建方式。
注意：请参阅人员保护确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。
注意：请参阅查看安全健康的作业规程。
- 2026-02-20: 添加了“如需通过本程序诊断辅助约束系统 (SRS) ，请使用 PROC_RCM_DISARM”的说明。
警告
If using this
procedure to diagnosis the vehicle's Supplemental Restraint Systems (SRS),
disarm the RCM, which will prevent all airbags and pretensioners from deploying.
Re-arm the RCM after all of the vehicle's SRS components are re-installed.
警告
Make sure LV
power has been disconnected for at least 2 minutes before disconnecting the
electrical harness from Supplementary Restraint System (SRS) components, such as
Restraint Control Module, sensors, airbags, etc. Failure to do so can result in
unintended safety system behaviors. For more information on SRS precautions, see
.
警告
In the event of an
airbag or seatbelt pretensioner deployment, certain components must be replaced, and
other components must be inspected for damage. Refer to the Collision Repair
Manual for a specific list of items that must be inspected and
replaced.
扭矩规格
| 描述 | 扭矩值 | 推荐工具 | 重复使用/更换 | 备注 |
|---|---|---|---|---|
| Bolts (x10) that attach the LH/RH curtain airbag to the body |
 9 Nm (6.6 lbs-ft) |
|
重复使用 |
注 请勿使用冲击工具安装自攻螺栓。 |