2026-05-12

Center Console (Remove and Install)

Correction code 15190101 0.30 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Torque Specifications

Tabela 1. Torque Specifications: Center Console (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Center console side and rear corner to body bolts
7 Nm (5.2 lbs-ft)
  • 10 mm socket
Reuse
Inner front center console to body screws
1.7 Nm (1.3 lbs-ft)
  • Torx T20 socket
  • Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only)
Reuse

Remove

  1. Remove and attach the customer's belongings from the center console, if needed.
  2. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  3. Remove the driver floormat.
  4. Remove the LH center console side panel carpet. See #GUID-F4937396-BA44-41B6-87B7-8A7CFE6939D3.
  5. Remove the bolts that attach the LH front of the center console to the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  6. Remove the front passenger floormat.
  7. Remove the RH center console side panel carpet. See #GUID-F4937396-BA44-41B6-87B7-8A7CFE6939D3.
  8. Remove the bolts that attach the RH front of the center console to the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  9. Remove the center console lower rear panel. See #GUID-617524AB-052C-4C72-AE90-B152DC8B0B5C.
  10. Remove the bolt that attaches the LH rear of the center console to the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  11. Remove the bolt that attaches the RH rear of the center console to the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  12. On the touchscreen, select Control > Safety & Security > Vehicle Power > Power Off to power off the vehicle.
  13. Disconnect 12V power. See 12V/LV Power (Disconnect and Connect).
  14. Disconnect the electrical connector from the rear of the center console.
  15. Disconnect the electrical connector that is located at the RH front of the center console.
  16. Close the center console rotating lid to prevent it from getting stuck on the center display upon removal of the center console from the vehicle.
  17. With an assistant, remove the center console from the vehicle as follows:
    1. Tilt the rear of the center console upwards.
    2. Pull the center console towards the rear of the vehicle.
    3. Tilt the front of the center console upwards.
    4. Remove the center console through the passenger front door.

Install

  1. With an assistant, install the center console into the vehicle as follows:
    1. Tilt the front of the center console downwards.
    2. Slide the center console towards the front of the vehicle.
    3. Tilt the rear of the center console downwards until it is in place.
  2. Open the center console rotating lid.
  3. Connect the electrical connector in the rear of the center console.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Ensure the connector is properly installed. Perform a push-pull test before continuing this procedure.
  4. Install the bolt that attaches the RH rear of the center console to the body.
    7 Nm (5.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  5. Install the bolt that attaches the LH rear of the center console to the body.
    7 Nm (5.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  6. Install the center console lower rear panel. See #GUID-617524AB-052C-4C72-AE90-B152DC8B0B5C.
  7. Connect the electrical connector that is located at the RH front of the center console.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Ensure the connector is properly installed. Perform a push-pull test before continuing this procedure.
  8. Install the bolts that attach the RH front of the center console to the body.
    7 Nm (5.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  9. Install the RH center console side panel carpet. See #GUID-F4937396-BA44-41B6-87B7-8A7CFE6939D3.
  10. Install the front passenger floormat.
  11. Install the bolts that attach the LH front of the center console to the body.
    7 Nm (5.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  12. Install the LH center console side panel carpet. See #GUID-F4937396-BA44-41B6-87B7-8A7CFE6939D3.
  13. Install the driver floormat.
  14. Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  15. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  16. Restore the customer's belongings into the center console, if needed.