2026-06-26

Buckle - 2nd Row - LH (5 Seat) (Remove and Replace)

Correction code 20057002 0.18 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

  • 2024-11-26: Add a note to clarify that harness should not be around bolt when install the buckle to seat assembly.

Torque Specifications

Table 1. Torque Specifications: Buckle - 2nd Row - LH (5 Seat) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH buckle to the body of the vehicle
40 Nm (29.5 lbs-ft)
  • Torx T50 socket
 Replace Bolt is captured in the buckle assembly

Remove

  1. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  2. Use a clip prytool to release the clip that attaches the LH 2nd row buckle to the seat frame.
  3. Disconnect the LH 2nd row buckle electrical connector.
  4. Release the captured bolt that attaches the LH 2nd row buckle to the seat frame.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • Torx T50 socket

Install

  1. Install the LH 2nd row buckle to the seat frame by tightening the captured bolt.
    40 Nm (29.5 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure to not pinch the wire between the bolt and the buckle bracket. Harness should not be around bolt.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • Torx T50 socket
  2. Connect the LH 2nd row buckle electrical connector.
  3. Secure the clip that attaches the LH 2nd row buckle to the seat frame.
  4. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).