2026-05-12

Hinge - Hood - LH (Remove and Replace)

Correction code 11330302 0.36 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Remove

  1. Remove the hood from the vehicle. See Hood (Remove and Install).
  2. Release the clip that attaches the LH gas strut to the hood hinge, and then remove the strut from the assembly.
  3. Apply masking tape to the LH hinge location to aid in alignment during install.
  4. Remove the bolts that attaches the LH hood hinge to the body.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13mm swivel ball socket
  5. Remove the LH hood hinge from the vehicle.

Install

  1. Position the LH hood hinge into the vehicle.
  2. Install the bolts that attaches the LH hood hinge to the body.
    25 Nm (18.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use the masking tape to aid in alignment. Adjust the hood hinge as needed.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13mm swivel ball socket
  3. Remove the masking tape from the LH hinge location.
  4. Install the clip that attaches the LH gas strut to the hood hinge.
  5. Install the hood. See Hood (Remove and Install).