2026-05-12

Hood (Remove and Install)

Correction code 10100301 0.24 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Remove

  1. Open the LH front door and fully lower the LH front window.
  2. Open the hood.
  3. Use a telescoping hood prop to support the hood.
  4. Use tape to mark the mounting locations of the LH and RH hood hinges on the hood.
  5. With assistance, remove the nuts that attach the hood to the RH hood hinge.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13 mm deep socket
    • 3 in extension
    • Flex head ratchet/flex head torque wrench
  6. With assistance, remove the nuts that attach the hood to the LH hood hinge, and then remove the hood from the vehicle and place on a padded surface.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13 mm deep socket
    • 3 in extension
    • Flex head ratchet/flex head torque wrench

Install

  1. With an assistant, install the hood assembly onto the vehicle and align the tape marks with the hood hinges.
  2. With assistance, loosely install the nuts that attach the hood to the LH hood hinge.
  3. With assistance, loosely install the nuts that attach the hood to the RH hood hinge.
  4. Carefully close the hood, and then check hood fitment.
  5. Perform gap and flush adjustments on the hood assembly, if necessary. See .
  6. Open the hood, and then torque the LH and RH hinge nuts.
    15 Nm (11.1 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13 mm deep socket
    • 3 in extension
    • Flex head ratchet/flex head torque wrench
  7. Clean the LH and RH hood hinge bolts and the surrounding area with isopropyl alcohol (IPA), and then let dry for at least 1 minute.
  8. If necessary, apply touch up paint matching the vehicle's body color to the LH and RH hood hinge studs/nuts.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Shake the touch paint before application. Allow for necessary dry time before closing the hood.
  9. Close the hood.
  10. Raise the LH front window and close the LH front door.