2022-01-26

Hinge - Door - Rear - Lower - LH (Remove and Replace)

Correction code 11337002 0.18 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Remove

  1. Open the LH front door and fully lower the LH front window.
  2. Apply masking tape to the area surrounding the LH lower rear door hinge on the body and door to aid in alignment during installation.
  3. Remove the bolts that attach the LH lower rear door hinge to the body.
    24 Nm (17.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13mm swivel ball socket
  4. Remove the bolt or nut that attaches the LH lower rear door hinge to the door.
    49 Nm (36.1 lbs-ft)
    49 Nm (36.1 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13mm deep socket
    • 6 in extension
    Figure 1. Fixation by bolt
    Figure 2. Fixation by nut
  5. Carefully remove the LH lower rear door hinge from the vehicle.

Install

  1. Use the alignment tape to position the LH lower rear door hinge onto the body, and then hand tighten the bolts that attach the hinge to the body.
  2. Use the alignment tape to position the LH lower rear door hinge onto the door, and then hand tighten the bolt or nut that attaches the hinge to the door.
    Figure 3. Fixation by bolt
    Figure 4. Fixation by nut
  3. Close the LH front door and check for gap and flushness. Adjust as necessary.
  4. Tighten the bolt or nut that attaches the LH lower rear door hinge to the door.
    49 Nm (36.1 lbs-ft)
    49 Nm (36.1 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13mm deep socket
    • 6 in extension
  5. Tighten the bolts that attach the LH lower rear door hinge to the body.
    24 Nm (17.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13mm swivel ball socket
  6. Remove the masking tape from the door and body.
  7. Apply touch up paint on the LH hinge rear door bolts as needed.
    Informational PurposesAn informational icon, calling your attention
    Note
    Shake the touch up paint before applying. Allow the first coat to dry for 20 minutes before applying and second coat.
  8. Raise the LH front window and close the LH front door.