2026-05-13

Reservoir - Windshield Washer (Remove and Replace)

Correction code 17501102 0.42 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Remove

  1. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  2. Remove the LH and RH wiper arms. See #GUID-40F2AE79-B55A-4796-B733-9622D9A5F73B.
  3. Remove the cowl screen panel. See Panel - Cowl Screen (Remove and Replace).
  4. Remove the wiper motor. See Wiper Module (Remove and Replace).
  5. Remove the windshield washer system assembly. .
  6. Remove the washer hose, washer pump and washer grommet from the reservoir.
    Informational PurposesAn informational icon, calling your attention
    Note
    Inspect the washer pump grommet for damage and replace as necessary.
  7. Use a plastic trim tool to gently pry the washer level sensor from the washer assembly, and then remove the rubber grommet and sensor from the assembly..
    Informational PurposesAn informational icon, calling your attention
    Note
    Inspect the level sensor grommet for damage and replace as necessary.
  8. Remove the windshield washer reservoir.

Install

Installation procedure is the reverse of removal.