2026-05-12

Seal - Body - Side - Front - Primary - LH (Remove and Replace)

Correction code 11700302 0.06 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Remove

  1. Open the LH rear door.
  2. Pull on the LH primary front side body seal to release it from the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Start in the corner closest to the B-pillar applique and pull straight down to release the upper portion of the trim first.

Install

  1. Position the LH primary front body seal to the mid A-pillar trim, and then press the seal into position working along the upper bright trim molding.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the seam on the seal is even with the bottom of the LH lower B-Pillar.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the wider side of the seal is seated towards the interior of the vehicle.
  2. Tuck the seal into the bright trim molding.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure that the trim is fitted properly into the trim panels and the headliner
  3. Press the LH primary front body seal into the B-pillar, and work downwards toward the bottom of the A-pillar.
    Informational PurposesAn informational icon, calling your attention
    Note
    If excess material forms along the seal, release the seal and disperse in opposite directions.
  4. Calibrate the windows. See .
  5. Confirm that the window operates correctly and without any abnormal noise.