2026-05-12

Trim - B-Pillar - Upper - LH (Remove and Replace)

Correction code 15183002 0.06 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Equipamento:
  • 1133787-00-A Key, Seat Belt Release, Model 3

Remove

  1. Open both LH doors.
  2. Move the LH front seat fully forward.
  3. Insert the seat belt release key (1133787-00-A) into the bottom of the seatbelt pretensioner coupling to release the seatbelt from the pretensioner.
  4. Release the clips that attach the LH upper B-pillar trim to the B-pillar.
    Informational PurposesAn informational icon, calling your attention
    Note
    Release the bottom clips first, and then release the clips at the top of the trim.
  5. Guide the seatbelt retainer through the LH upper B-pillar trim, and then remove the trim from the vehicle.

Install

  1. Guide the seatbelt retainer through the LH upper B-pillar trim, and then align the seat belt slider with the trim.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the seat belt is not twisted.
  2. Insert the top of the LH upper B-pillar trim under the headliner to align the clips, and then press the bottom to fully seat the lower portion of the trim.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the seal correctly overlaps the trim.
  3. Install the LH front seatbelt pretensioner coupling onto the LH front seat pretensioner.
    Informational PurposesAn informational icon, calling your attention
    Note
    Perform a pull-push-pull test to verify the pretensioner and coupling are fully engaged.
  4. Move the LH front seat to its original position.
  5. Close both LH doors.