2026-05-12

Seal - Trunk (Remove and Replace)

Correction code 11702002 0.18 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Install

  1. Align the line on the trunk seal to the rear view mirror.
  2. Install the trunk seal to the perimeter of the trunk.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Tap the trunk seal with a rubber hammer and use a plastic trim tool to fully install the trunk seal to the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the bottom of the seal is tucked into the rear fascia.
  3. Install the trunk sill trim. See #GUID-65DAFEC6-8C71-450D-A401-8CD4EB2422E2.
  4. Pull the strings on the trunk seal to seat it flush across the interior.
  5. Install the rear trunk floor.
  6. Close the trunk.