Striker - Door - Rear - LH (Remove and Replace)
Correction code
11354002
0.12
NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído.
NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação.
NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.
Remove
- Open the LH rear door.
- Mark the position of the LH rear door striker using masking tape.
-
Remove the bolts that attach the LH rear door striker to the body, and then remove the striker from the vehicle.
TIpUse of the following tool(s) is recommended:
- T45 socket
Install
-
Hand-tighten the bolts that attach the LH rear door striker to the body.
- Close the LH rear door and verify the door position; adjust the position of the striker and verify fitment, if necessary.
-
Tighten the bolts that
attach the LH rear door striker to the body.
26 Nm (19.2 lbs-ft)TIpUse of the following tool(s) is recommended:- T45 socket
- Remove the masking tape from the body.
- Close the LH rear door.