Trunk Waterfall Crossmember (Upper)

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	ASY, TRUNK WATERFALL CROSSMEMBER UPPER (Trunk Waterfall Upper Crossmember)
6	High Strength Structural Rivet, 6.5 mm
3	Structural Bulb Rivet, 6.5 mm
2	Bolt , SCRW HF M8-1.25x20 [10.9]ZnAl	Tesla part number 1007580-00-A.
2	Nut , NUT,M8-1.25,HF,Steel[10],ZnAl,BLACK	Tesla part number 1006628-01-A.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the Rear Motor Cover Floor.
Remove the Trunk Waterfall Panel (Vehicles Built Through May 21, 2024).
Remove the original component.

or Factory Spot Welds

or RIVTAC

BOM
Secure the nut to back of the Rear Node using structural adhesive.
Prepare for installation.

or High Strength Structural Rivets, 6.5 mm

or Structural Bulb Rivets, 6.5 mm

or Bolts
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.
Torque the bolt to 25 Nm.
Install the Trunk Waterfall Panel (Vehicles Built Through May 21, 2024).
Install the Rear Motor Cover Floor.
Perform any necessary post-repair operations.