Second Row Seat Bolster Bracket
Correction code:
10101901602
10101901802
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair and Service
repair work required to perform this procedure, including
the linked Collision Repair procedures and linked Service
procedures. Do not stack Collision Repair correction
codes unless explicitly told to do so. Depending
on the damage to the vehicle, additional repairs may be
required.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASSY - RR QTR INR COMP (Quarter Inner Complete Assembly ) | |
| 4 | Structural Bulb Rivet, 6.5 mm |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Remove the Seat Back - 2nd Row - RH (Remove and Replace).
- Remove the Bracket - Seatbelt - 2nd Row - LH (Remove and Replace).
- Remove the Insulator - Wheelhouse - Rear - RH (Remove and Replace).
- Remove the Insulator - Motor Bay - Rear (Remove and Replace).
- Remove the Wheel Arch Liner - Rear - LH (Remove and Replace).
- Remove the Seat Back - 2nd Row - LH (Remove and Replace).
- Remove the Busbars - Charge Port to HV Battery (Remove and Replace).
- Remove the Bracket - Seatbelt - 2nd Row - LH (Remove and Replace).
- Remove the Insulator - Wheelhouse - Rear - LH (Remove and Replace).
- Remove the Insulator - Motor Bay - Rear (Remove and Replace).
- Remove the Wheel Arch Liner - Rear - LH (Remove and Replace).
-
Remove the original component.
or Factory Spot Welds
-
Remove the Second Row Seat
Bolster Bracket from the Quarter Inner Complete Assembly service part.
-
Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
- Perform any necessary post-repair operations.
- Install the Wheel Arch Liner - Rear - LH (Remove and Replace).
- Install the Insulator - Motor Bay - Rear (Remove and Replace).
- Install the Insulator - Wheelhouse - Rear - LH (Remove and Replace).
- Install the Bracket - Seatbelt - 2nd Row - LH (Remove and Replace).
- Install the Busbars - Charge Port to HV Battery (Remove and Replace).
- Install the Seat Back - 2nd Row - LH (Remove and Replace).
- Install the Wheel Arch Liner - Rear - LH (Remove and Replace).
- Install the Insulator - Motor Bay - Rear (Remove and Replace).
- Install the Insulator - Wheelhouse - Rear - RH (Remove and Replace).
- Install the Bracket - Seatbelt - 2nd Row - LH (Remove and Replace).
- Install the Seat Back - 2nd Row - RH (Remove and Replace).