Cowl Top (Vehicles Built On or After November 20, 2021)
Correction code:
10101029202
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair and Service
repair work required to perform this procedure, including
the linked Collision Repair procedures and linked Service
procedures. Do not stack Collision Repair correction
codes unless explicitly told to do so. Depending
on the damage to the vehicle, additional repairs may be
required.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Verify This is the Correct Repair Procedure
- After November 20, 2021, use this repair procedure.
- On November 20,
2021:
- Remove any components necessary to view the portion of the original Cowl Side Assembly that is attached to the Cowl Top.
- If the Cowl Top
is attached to the Cowl Side Assembly as shown below:
Use this repair procedure – Cowl Top (Vehicles Built On or After November 20, 2021). Do not use this procedure. Instead, use the Cowl Top (Vehicles Built Through November 20, 2021) repair procedure.
- Through November 19, 2021, use the Cowl Top (Vehicles Built Through November 20, 2021) repair procedure.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASY - COWL TOP (Cowl Top) | |
| 2 | High Strength Structural Rivet, 6.5 mm | |
| 12 | Structural Bulb Rivet, 6.5 mm | |
| 11 | Flow Form Rivet S08 | |
| 3 | Flow Form Rivet S48 | |
| 4 | Bolt , HF M6X18 PC88 MAT | Tesla part number 1006529-00-A. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.