Trunk Waterfall Crossmember (Lower)
Correction code:
10101806302
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
Quantity | Description | Image / Notes |
---|---|---|
1 | ASY, TRUNK WATERFALL CROSSMEMBER LOWER (Trunk Waterfall Lower Crossmember) |
![]() |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Remove the Rear Motor Cover Floor.
- Remove the Trunk Waterfall Panel (Vehicles Built Through May 21, 2024).
- Remove the Trunk Waterfall Crossmember (Upper).
- Remove the original component.
- Prepare for installation.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
- Install the Trunk Waterfall Crossmember (Upper).
- Install the Trunk Waterfall Panel (Vehicles Built Through May 21, 2024).
- Install the Rear Motor Cover Floor.
- Perform any necessary post-repair operations.