14/08/2024 17:01:32

B–Pillar Inner

Parts List

Quantity Description Image / Notes
1 ASY - B-PILLAR INNER AND REINF (B–Pillar Inner)
2 Bolt , HF M8-1.25x17 HEX FLANGE BOLT Tesla part number 1016260-00-A.
3 Bolt, Torx-head , M8x20 PC98 ADH MAT Tesla part number 1014747-00-B.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

  1. Remove the B–Pillar Outer.
  2. Remove the original component.
    or Factory Spot Welds

    or Bolts

    or Bolt, Torx-head

  3. Prepare for installation.
    or Bolts

    or Bolt, Torx-head

    or Installation Spot Welds

  4. Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
  5. Install the new component or components.
    Torque all bolts to 24 Nm.
  6. Perform resistance spot welding.
    or Installation Spot Welds
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Failure to follow all welding safety precautions, including the use of personal protective equipment, could result in serious injury or property damage. Only technicians who have completed Tesla’s approved welding training are authorized to weld structural components on Tesla vehicles.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not weld on a Tesla vehicle before performing the Vehicle Electrical Isolation Procedure (refer to the vehicle-specific Service Manual for more information on the Vehicle Electrical Isolation Procedure). Welding on a Tesla vehicle with an energized high or low voltage system might damage vehicle components.
  7. Install the B–Pillar Outer.
  8. Perform any necessary post-repair operations.