Trunk Waterfall Panel (Vehicles Built After May 21, 2024)

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	PNL, TRUNK, RR WATERFALL, MDLS (Trunk Waterfall Panel)
18	Flow Form Rivet S08
14	High Strength Structural Flange Rivet, 6.5 mm
2	Bolt , M8x20	Tesla part number 1007580-00-A.
2	Nut , NUT,M8-1.25,HF,Steel[10],ZnAl,BLACK	Tesla part number 1006628-01-A.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the original component.

or Factory Spot Welds

BOM, 5/16 in

or Factory Structural Rivets
Prepare for installation.

Note
A red X indicates a location where a factory-installed fastener is not being replaced.

or Flow Form Rivets, S08

or High Strength Structural Flange Rivet, 6.5 mm

or Bolts

Nut
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.
Torque the bolts to 25 Nm.
Perform any necessary post-repair operations.