前减震塔
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- Properly mount the vehicle on a frame bench when performing this procedure.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | M3 ASY, SHOCK TOWER UPR（前减震塔罩） |
|
| 1 | M3 ASY SHOCK TWR SUP RR（前减震塔后支撑） |
|
| 1 | M3 ASY SHOCK TWR SUP FR（前减震塔前支撑） |
|
| 12 |
Structural Bulb Rivet, 6.5 mm
|
|
| 40 |
High Strength Structural Rivet, 6.5 mm
|
|
| 3 |
Bolt
|
Tesla 零件号 1011818-00-A。 |
| 3 |
Nut
|
Tesla 零件号 1006628-01-A。 |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
拆下前排座位外侧。
-
Remove the original component.
Factory Spot Weld Area
-
准备组装减震塔组件。
High Strength Structural Rivet, 6.5 mm
注红圈标注的铆钉需要从面板背面进行安装。
Bolt
注红圈标注的螺栓需要从面板背面进行安装。
Installation Spot Weld
- 安装到车架工作台，然后向组成减震塔的组件接合面涂抹结构型粘合剂。
-
组装组件以便制作新减震塔。
注将螺栓拧紧至 22 Nm。
- 从车辆上拆下新减震塔总成。
-
Perform resistance spot
welding.
警告Failure to follow all welding safety precautions, including the use of personal protective equipment, could result in serious injury or property damage. Only technicians who have completed Tesla’s approved welding training are authorized to weld structural components on Tesla vehicles.警告Do not weld on a Tesla vehicle before performing the Vehicle Electrical Isolation Procedure (refer to the vehicle-specific Service Manual for more information on the Vehicle Electrical Isolation Procedure). Welding on a Tesla vehicle with an energized high or low voltage system might damage vehicle components.
-
Prepare for installation.
Installation Spot Weld Area
GMA Weld
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
Perform resistance spot
welding.
警告Failure to follow all welding safety precautions, including the use of personal protective equipment, could result in serious injury or property damage. Only technicians who have completed Tesla’s approved welding training are authorized to weld structural components on Tesla vehicles.警告Do not weld on a Tesla vehicle before performing the Vehicle Electrical Isolation Procedure (refer to the vehicle-specific Service Manual for more information on the Vehicle Electrical Isolation Procedure). Welding on a Tesla vehicle with an energized high or low voltage system might damage vehicle components.
-
Perform GMA welding.
警告Failure to follow all welding safety precautions, including the use of personal protective equipment, could result in serious injury or property damage. Only technicians who have completed Tesla’s approved welding training are authorized to weld structural components on Tesla vehicles.警告To maintain vehicle crash integrity, use only approved welding wire and an approved GMA welder to perform GMA welding on Tesla vehicles. Refer to 已批准的气体保护金属极弧 (GMA) 焊接器和焊丝 for information on approved GMA welders and welding wire.警告Do not weld on a Tesla vehicle before performing the Vehicle Electrical Isolation Procedure (refer to the vehicle-specific Service Manual for more information on the Vehicle Electrical Isolation Procedure). Welding on a Tesla vehicle with an energized high or low voltage system might damage vehicle components.注Before GMA welding, a test weld using material of the same gauge and type should be performed to make sure that the welding equipment settings produce a satisfactory joint.
-
安装前排座位外侧。
- Perform any necessary post-repair operations.