2024-07-17

B 柱内件总成（完整）

Parts List

Quantity Description Image / Notes
1 M3 ASY, B PILLAR INR（B 柱内件总成）
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

  1. 拆下 B 柱外件总成（完整）。
  2. 根据图示修整 A 柱外件，露出下方 B 柱内件。
  3. Remove the original component.
    or Factory Spot Welds
  4. 如下所示切割新组件。
    Cut Line
    • A = 5 mm
  5. Prepare for installation.
    or Installation Spot Welds
    Informational PurposesAn informational icon, calling your attention
    注
    确保安装点焊焊缝将新 B 柱内件固定到下方面板上。
  6. Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
  7. Install the new component or components.
  8. Perform resistance spot welding.
    or Installation Spot Welds
    Warning IconA warning icon, calling your attention to a possibly risky situation
    警告
    Failure to follow all welding safety precautions, including the use of personal protective equipment, could result in serious injury or property damage. Only technicians who have completed Tesla’s approved welding training are authorized to weld structural components on Tesla vehicles.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    警告
    Do not weld on a Tesla vehicle before performing the Vehicle Electrical Isolation Procedure (refer to the vehicle-specific Service Manual for more information on the Vehicle Electrical Isolation Procedure). Welding on a Tesla vehicle with an energized high or low voltage system might damage vehicle components.
  9. 安装 B 柱外件总成（完整）。
  10. Perform any necessary post-repair operations.