2024-07-10

后千斤顶垫支架

Repair Procedure

  1. 拆下车身侧外件总成的必要部分,以便露出下方所要更换的组件。
  2. Remove the original component.

    or Factory Spot Welds

  3. Prepare for installation.
  4. Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
  5. Install the new component or components.
  6. 安装为露出所要更换的组件而被拆下的车身侧外件总成部分。
  7. 在后千斤顶垫支架底部法兰上安装高强度结构型灯笼铆钉。
    Informational PurposesAn informational icon, calling your attention
    A red X indicates a location where a factory-installed fastener is not being replaced.

    or High Strength Structural Rivets, 6.5 mm

  8. Perform any necessary post-repair operations.