第三排座椅横梁（下部）添加螺柱

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.
在不从车上拆下第三排座椅横梁（下部）的情况下执行本程序。

Parts List


Quantity	Description	Image / Notes
2	Rivet Stud , RIV-STUD,M6X15（铆钉螺柱）	Tesla 零件号 1062747-00-A。

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

在指定位置开 6 毫米的孔。
or Drill through factory spot welds
注
When drilling out spot welds, use a drill bit that creates a hole correctly sized for the fastener that will replace the spot weld.
- A = 126 毫米。
- B = 162 毫米。
Prepare for installation.
or Rivet Stud
Install the new component or components.
如图所示，向铆钉螺柱的底部涂抹接缝密封剂（在装有铆钉螺柱的面板的两侧）。

注
将一个夹子固定在第三排座椅横梁（下部）面板外侧的铆钉螺柱上。在该位置向铆钉螺柱涂抹一层 5 毫米厚的接缝密封剂。
Perform any necessary post-repair operations.