置物板横梁总成（无中间凹槽）
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | M3 ASY, PARCEL SHELF CROSSMEMBER（置物板横梁总成） |
|
| 36 |
Structural Bulb Rivet, 6.5 mm
|
|
| 1 |
Countersunk Rivet, 4.8 mm Short
|
|
| 4 |
Flow Form Rivet S18
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
拆下中后槽。
-
Remove the original component.
Factory Spot Weld
Factory Spot Weld (2 layers)
-
Prepare for installation.
Countersunk Rivet, 4.8 mm Short
注LH 侧的沉头铆钉仅用于避免妨碍 TPMS 模块。
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
安装中后槽。
- Perform any necessary post-repair operations.