Sill Insert (Complete)
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
Quantity | Description | Image / Notes |
---|---|---|
1 | SUB-ASY - SIDE SILL INSERT (Sill Insert) | |
1 | Bolt , M8-1.25x37,[109],G1009,CM | Tesla part number 1629418-00-A. |
1 | Bolt , ,M10-1.5X42,[109],G1009,PC | Tesla part number 1516228-00-B. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Remove the necessary portion of the Door Ring Outer.
-
Remove foam dams.
NoteSave the foam dams for installation in a later step.
-
Remove the original component.
or Bolts
-
Prepare for installation.
or Bolts
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
Torque the fasteners as follows:
- Front bolt: M10-1.5x42, [109],G1009,PC, part number 1516228-00-B: 60 Nm.
- Rear bolt: M8-1.25x37, [109],G1009,CM, part number 1629418-00-A: 35 Nm.
- Install the foam dams removed in an earlier step.
- Install the necessary portion of the Door Ring Outer.
- Perform any necessary post-repair operations.