Rear Rail End Plate (For 1–Piece Cast Under Body)
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | MY ASY-PLT-BUMPER MTG RR LH SVC E-COAT (Rear Rail End Plate) |
|
| 4 |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the Rear Panel Side Assembly (for 1–Piece Cast Under Body).
-
Remove the original component.
or 
Bolts
-
Prepare for installation.
or Bolts
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
-
Install the new component or components.
Torque the bolts to 50 Nm.
-
Install the Rear Panel Side Assembly.
- Perform any necessary post-repair operations.