03/07/2024 16:05:53

Front Frame Rail Outer (Complete)

Parts List

Quantity Description Image / Notes
1 M3 ASY, FRONT RAIL OUTER, SVC (Front Rail Outer)
26

High Strength Structural Rivet, 6.5 mm

1 WELD STUD,DAW,M6x18,STL[88],ZN,SD Tesla part number 1129607-00-A.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

  1. Remove the Torque Box.
  2. Remove the Shotgun Shear Wall.
  3. Remove the original component.

    or Factory Spot Welds

  4. Prepare for installation.

    or Installation Spot Welds

    or High Strength Structural Rivets, 6.5 mm

    • A = 8 mm
  5. Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
  6. Install the new component or components.
  7. Perform resistance spot welding.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Failure to follow all welding safety precautions, including the use of personal protective equipment, could result in serious injury or property damage. Only technicians who have completed Tesla’s approved welding training are authorized to weld structural components on Tesla vehicles.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not weld on a Tesla vehicle before performing the Vehicle Electrical Isolation Procedure (refer to the vehicle-specific Service Manual for more information on the Vehicle Electrical Isolation Procedure). Welding on a Tesla vehicle with an energized high or low voltage system might damage vehicle components.
  8. Install the Shotgun Shear Wall.
  9. Install the Torque Box.
  10. Install the fasteners as indicated to attach the Torque Box to the Front Frame Rail Outer.

    or High Strength Structural Rivets, 6.5 mm

    • B = 64 mm
    • C = 49 mm
    • D = 7 mm
  11. Prepare to install the weld stud as indicated.
    Stud
    • E = 20 mm.
    • F = 20 mm.
    GMA Weld
  12. Perform GMA welding.
    GMA Weld
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Failure to follow all welding safety precautions, including the use of personal protective equipment, could result in serious injury or property damage. Only technicians who have completed Tesla’s approved welding training are authorized to weld structural components on Tesla vehicles.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    To maintain vehicle crash integrity, use only approved welding wire and an approved GMA welder to perform GMA welding on Tesla vehicles. Refer to Approved Gas Metal Arc (GMA) Welders and Welding Wire for information on approved GMA welders and welding wire.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not weld on a Tesla vehicle before performing the Vehicle Electrical Isolation Procedure (refer to the vehicle-specific Service Manual for more information on the Vehicle Electrical Isolation Procedure). Welding on a Tesla vehicle with an energized high or low voltage system might damage vehicle components.
    Informational PurposesAn informational icon, calling your attention
    Note
    Before GMA welding, a test weld using material of the same gauge and type should be performed to make sure that the welding equipment settings produce a satisfactory joint.
  13. Perform any necessary post-repair operations.