Instrument Panel - Noise Vibration Harness Pad - Passenger (Remove and Replace)
Correction code
1405011602
FRT
1.68
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the instrument panel upper carrier from vehicle. See Assembly - Instrument Panel - Upper (Remove and Replace).
-
Remove instrument panel noise
vibration pad from instrument panel passenger side.
Install
-
Install instrument panel noise
vibration pad onto instrument panel passenger side.
- Install the instrument panel upper carrier to vehicle. See Assembly - Instrument Panel - Upper (Remove and Replace).