2026-08-26

Antenna Amplifier - FM/DAB (RHD)(Model Y L) (Remove and Replace)

Correction code 21300101102 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the rear headliner. See Rear Headliner (Model YL) (Remove and Replace).
  2. Disconnect the electrical connectors (x2) from the FM/DAB antenna amplifier.
  3. Remove the bolt that attaches the FM/DAB antenna amplifier to the body, and then remove the amplifier from the vehicle.
    Tip
    Use of the following tool(s) is recommended:
    • 10 mm socket

Install

  1. Position the FM/DAB antenna amplifier to the vehicle, and then install the bolt that attaches the amplifier to the body.
    8 Nm (5.9 lbs-ft)
    Tip
    Use of the following tool(s) is recommended:
    • 10 mm socket
  2. Connect the electrical connectors (x2) to the FM/DAB antenna amplifier.
  3. Install the rear headliner. See Rear Headliner (Model YL) (Remove and Replace).