Web Guide - Seatbelt - 1st Row - LH (Remove and Replace)
Correction code
2005010202
FRT
0.30
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
- 2025-04-21: Updated torque and image of the web guide bolt.
Torque Specifications
| Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
|---|---|---|---|---|
| Bolt that attach the LH 1st web guide bar to the vehicle |
 10 Nm (7.4 lbs-ft) |
|
Replace |
Remove
-
Release the LH B-pillar upper trim and
move it aside. See Trim - B-Pillar - Upper - LH (Remove and Replace).
NoteIt is not necessary to release the seatbelt from the pretensioner.
-
Remove the LH front seat belt web
guide.
NoteThe web guide will be supplied with bolt and gasket as an assembly.TipUse of the following tool(s) is recommended:
- 10 mm socket
Install
-
Install LH front seat belt web
guide.10 Nm (7.4 lbs-ft)TipUse of the following tool(s) is recommended:
- 10 mm socket
- Install the LH B-pillar upper trim. See Trim - B-Pillar - Upper - LH (Remove and Replace).