Wiper Arm - Driver - LHD (Remove and Replace)
Correction code
1750020802
FRT
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
-
Remove the LH wiper arm and blade assembly. See Wiper Arm And Blade - Driver (Remove and Replace).
-
Press down on the tab that attaches
the LH wiper blade to the LH wiper arm, and then slide the wiper blade away to separate
the arm from the assembly.
Install
-
Install the LH wiper blade to the LH wiper arm.
NoteAn audible is heard when the wiper blade is fulling engaged.
- Install the LH wiper arm and blade assembly. See Wiper Arm And Blade - Driver (Remove and Replace).