2026-08-09

Rocker Carrier - LH (Remove and Replace)

Correction code 1220020502 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications:Rocker Carrier - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the LH lower rocker panel cover to the body
9 Nm (6.6 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse

Remove

  1. Remove the LH rocker cover from the rocker carrier. See Rocker Cover - LH (Remove and Replace)
  2. Remove the bolts (x2) that attach the LH lower rocker panel cover to the body.
    Tip
    Use of the following tool(s) is recommended:
    • Cordless Ratchet/Impact Driver
    • 10 mm deep socket
    • Ratchet/torque wrench
  3. Release the clips (x10) that attach the LH lower rocker panel cover to the rocker panel, and then remove the cover from the panel.

Install

  1. Install the clips (x10) that attach the LH lower rocker panel cover to the rocker panel.
  2. Install the bolts (x2) that attach the LH lower rocker panel cover to the body.
    9 Nm (6.6 lbs-ft)
    Tip
    Use of the following tool(s) is recommended:
    • Cordless Ratchet/Impact Driver
    • 10 mm deep socket
    • Ratchet/torque wrench
  3. Install the LH rocker cover to the rocker carrier. See Rocker Cover - LH (Remove and Replace)