Puddle Lamp - Center Console (Remove and Replace)
Correction code
1519010242
FRT
0.66
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the LH and RH front side panels. See Side Panel - Front - Center Console - LH (Remove and Replace).
- Remove the sliding door assembly. See Center Console - Sliding Bin Lid (Remove and Replace).
-
Disconnect the puddle lamp
connector.
-
Use a plastic trim tool to remove the
clips (x4) that attach the puddle light to the center console closeout, and then remove
the puddle light from the vehicle.
Install
-
Install the clips (x4) that attach the
puddle light to the center console closeout.
-
Connect the puddle lamp connector.
- Install the sliding door assembly. See Center Console - Sliding Bin Lid (Remove and Replace).
- Install the LH and RH front side panels. See Side Panel - Front - Center Console - LH (Remove and Replace).