Hood Strut (Remove and Replace)
Correction code
1133030302
FRT
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Equipment:
- 1080562-00-A - TELESCOPING HOOD PROP
Remove
- Remove the rear apron. See Underhood Apron - Rear (Remove and Replace).
- Support hood in open position.
-
Release clip securing LH gas strut to hood hinge and remove strut.
-
Release clip securing LH gas strut to
body mount and remove strut.
Install
-
Lubricate upper and lower pivot points.
-
Install gas strut onto body and hood mount.
- Remove telescoping hood prop.
- Install the rear apron. See Underhood Apron - Rear (Remove and Replace).