Closeout - Center Console (Model YL) (Remove and Replace)
Correction code
15190200202
FRT
0.60
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Torque Specifications
| Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
|---|---|---|---|---|
| Screw that secures the center console closeout to the center console |
 1.2 Nm (.9 lbs-ft) |
|
Reuse |
Remove
- Remove the sliding door assembly. See Sliding Door Assembly - Center Console (Model YL) (Remove and Replace).
- Remove the puddle light. See Puddle Lamp - Center Console (Remove and Replace).
-
Remove the screw that secures the
center console closeout to the center console.
TipUse of the following tool(s) is recommended:
- Torx T20 bit
- Digital Torque Screwdriver 0.10Nm - 2.0Nm
-
Release the tabs (x4) that attach the
closeout to the center console, and then remove the closeout from the vehicle.
Install
-
Install the tabs (x4) that attach the
closeout to the center console.
-
Install the screw that secures the
center console closeout assembly to the center console.1.2 Nm (.9 lbs-ft)TipUse of the following tool(s) is recommended:
- Torx T20 bit
- Digital Torque Screwdriver 0.10Nm - 2.0Nm
- Install the puddle light. See Puddle Lamp - Center Console (Remove and Replace).
- Install the sliding door assembly. See Sliding Door Assembly - Center Console (Model YL) (Remove and Replace).