2026-08-09

Bracket - Harness - Sill Panel - Front - LH (Remove and Replace)

Correction code 15180152 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the LH lower A pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace)
  2. Release LH front seat harness from sill trim clips.
    Note
    Be careful not to cut the wiring harness.
  3. Remove front sill panel harness fastening tapes and zip ties.
    Note
    Be careful not to cut the wiring harness.
  4. Remove LH front sill panel harness from bracket.
  5. Remove LH front sill panel harness bracket.

Install

  1. Install LH front sill panel harness bracket.
  2. Install LH front sill panel harness to bracket.
  3. Tighten front sill panel harness and bracket.
  4. Install clips securing LH seat harness to sill trim.
    Note
    Tuck excess harness between harness bracket and body.
  5. Install the LH lower A pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace)