Heat Pad - Seat Back - 2nd Row - LH (Model YL) (Remove and Replace)
Correction code
13080203102
FRT
0.72
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the LH 2nd row seat back trim assembly from the seat back foam assembly, and then discard the foam with heat pad on it. See Trim - Seat Back - 2nd Row - LH (Model YL) (Remove and Replace).
Install
-
Install a new seat back heat pad onto a new seat back foam assembly.
NoteEnsure the heat pad is securely adhered to the seat back foam assembly.
- Install the LH 2nd row seat back trim assembly to the seat back foam assembly. See Trim - Seat Back - 2nd Row - LH (Model YL) (Remove and Replace).