Seat Back - Complete - 3rd Row (Model YL) (Remove and Replace)
Correction code
13060100302
FRT
0.60
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the 3rd row seat back complete. See Seat Back - Complete - 3rd Row (Model YL) (Remove and Install).
Install
- Install the 3rd row seat back complete. See Seat Back - Complete - 3rd Row (Model YL) (Remove and Install).
- Locally connect a laptop with Toolbox 3 to the vehicle. See Toolbox (Connect and Disconnect).
- Click the Actions tab, type "PROC_VCLEFT_X_3R-SEAT-RECLINE-CALIBRATION" into the search field, click PROC_VCLEFT_X_3R-SEAT-RECLINE-CALIBRATION, click Run, and allow the routine to complete.
- Type "PROC_VCRIGHT_X_3R-SEAT-RECLINE-CALIBRATION" into the search field, click PROC_VCRIGHT_X_3R-SEAT-RECLINE-CALIBRATION, click Run, and allow the routine to complete.
- Disconnect the laptop.
- On the touchscreen, press and hold the Exit Service Mode button to exit Service Mode Plus.